Alxum IDE To USB C Converter, SATA IDE Hard Drive Adapter Cable For 2.5/3.5" IDE HDD And SATA HDD/SSD, With 12V/2A Power Supply

Port configuration: SATA1 (Port C): Dedicated channel SATA2 (Port B) & 3., 5 IDE (Port A): Shared channel (switch manually, no physical toggle) NOTE:IDE hard drives are not recommended for cloning due to their older technology and potential bad sectors. It is an ideal choice for data access, device backup, or data management and migration. It enables seamless data transfer between traditional and modern devices. 2 and SATA to USB Adapter - .2 Reader Enclosure Converter USB C 3.2... Upstream plug-and-play (driver-free) with hot-swap support. Clone Critical Note: Requires DC power connection for docking Disconnect upstream USB cable during operation Clone Sequential illumination (25%→50%→75%→100%) USB 5Gbps transfer speed for optimal performance. Enters sleep mode after 30 minutes of inactivity (LED turns off) Alxum SATA/IDE to USB C Hard Drive Adapter Cable, External Hard Disk Reader Converter for 2.5/3.5 inch HDD/SSD, with 12V/2A Power Supply and USB C [3-in-1 USB-C to SATA and IDE SSD Enclosure]This Device Enclosure Supports the SATA 3 and IDE 133 interface protocols. AlXUM 3-in-1 USB C to SATA & IDE Adapter With Clone Function Transferring a large 5GB file takes only a few seconds, significantly boosting efficiency! 1 Sleep Mode 2 Switching Button 3 What's in the box? 4 Compact and Portable Type-C interface with reversible design (no orientation required). Seamless legacy/modern storage conversion. It supports cloning from IDE (Drive A)/SATA2 (Drive B) to SATA (Drive C)., Note:1., It is not recommended to use an IDE hard drive for cloning., 2., When using the offline cloning function, you must connect the DC power supply and unplug the upstream USB cable., 3., Make sure the capacity of the target disk is greater than that of the original disk. It can read two hard drives simultaneously and display the drive letters of two drives. Alxum USB 3.0 to IDE SATA Converter, for Universal 2.5 & 3.5 inches SATA HDD SDD & IDE HDD Drives, Hard Drive Adapter with 12V 2A Power Adapter and USB 3.0... Supports SATA/ATAPI LBA48 addressing mode:The SATA1(C) port: It uses an independent transmission channel. Supports SATA/ATAPI LBA48 Addressing Mode. USB-C To SATA IDE Adapter Alxum IDE To USB C Converter, SATA IDE Hard Drive Adapter Cable For 2.5/3.5" IDE HDD And SATA HDD/SSD, With 12V/2A Power Supply Reader Software