Non-Invasive AC Current Sensor SCT-013 100A Max @ IOT Store Australia

Product parameters: Rated input current: 0-100A, rated output current: 0-50mA, rated output voltage: 0-1V, lead length 1., 5m/59., 05in, cable jack: 3., 5 mm, mechanical strength: no opening and closing times Less than 1000 times (tested at 20°C). SCT-013-000 Non-Invasive AC Current Sensor CT Clamp 100A=50mA SCT-013-000 100A 50mA Non-invasive Current Transformer, SCT013-000... Monitoring & Protection: Build your own circuit monitor with this 100A current sensor to reduce your power usage, or use it to build an overcurrent protection device for AC loads. Specification: 1., Model: SCT013 2., Frequency: 50HZ-1KHZ 3., Rated input current: 0-100A 4., Rated output current: 0-50mA 5., Rated output voltage: 0-1V 6., Opening size: 13×13mm/0., 51x0., 51in 7., Accuracy: less than or equal to 1% 8., Lead length: 1., 5m/59., 05in, standard Φ3., 5 three-core plug output 9., Two output forms of current and voltage (voltage output form has built-in sampling resistance)., 10., Core material: ferrite 11., Mechanical strength: opening and closing times not less than 1000 times (tested at 20°C) 12., Working temperature: -25℃～+70℃ 13., Safety index: electric strength (between the shell and the output) 6000V AC/1min 14., Flame retardant properties conform to UL94-V0 Application: For current measurement, monitoring and protection of AC motors, lighting equipment, air compressors, etc. This ac current sensor used for measuring alternating current and it can measure up to 100 A , This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi At the same time, this split-core current transformer is especially suitable for DIY use, and works well with for Raspberry Pi. Split Core Current Transformer Non-Invasive AC Current Sensor SCT-013 100A Max @ IOT Store Australia Sct 013 Package includes: You will get 1 x SCT-013-000 100A Non-invasive Split Core AC Current Transformer, 1 x 20Ω Resistor.